熱門搜索：
如何選擇自流平水泥
如何選擇自流平水泥？隨著自流平水泥這種無機地坪材料的廣泛應用，自流平水泥的根據不同的用途也發展成不同的種類。廣州澳恒公司15年來根據市場的需求已專業開發出十余種不同用途的自流平水泥。按類別可分為低端自流平水泥和高端自流平水泥。按抗壓強度分可分為普通自流平水泥，中強自流平水泥，高強自流平水泥。按使用大類分可分為工業用自流平水泥和商業用自流平水泥。按使用功能分可分為裝飾自流平水泥和功能性自流平水泥。因此，在采用澳恒自流平水泥地坪材料之前，先要根據自己的具體需求和用途，咨詢澳恒公司，確定使用自流平水泥的類型。再根據產品類型，進行比價，否則，就會出現低價產品高端用途或高價產品低端用途，其結果可想而知。
如：按抗壓強度分類，澳恒自流平水泥相對應的型號為：
1、普通自流平水泥：AP-330 商用自流平水泥中，抗壓強度為： 20--25mpa
2、中強自流平水泥：AP-330F 加強型自流平水泥，抗壓強度為：30-35mpa
3、高強自流平水泥：澳恒公司的其他型號產品，如：AP-340 面層高強自流平水泥，
AP-350 彩色水泥自流平，AP-320 多功能高強水泥自流平等。抗壓強度為：45mpa左右。
選用舉例：
1、如果是停車場，工廠，倉庫使用自流平水泥，要選擇能夠高承載，高耐磨的高強度自流平水泥，抗壓強度
45mpa，施工厚度5mm以上。否則，施工后產品的質量隱患就已經同在。
2、如果是簡單的地面精找平，為木地板，地毯，PVC塑膠地板等厚層飾面材料提供一個平整的基面，就選擇
20-25mpa的普通自流平水泥即可。
本文出自廣州澳恒建筑裝飾材料有限公司，轉載請注明出處！
相關文章：
How to choose self-leveling cement? With the wide application of self-leveling cement as an inorganic floor material, self-leveling cement has also developed into different types according to different uses. Over the past 15 years, Guangzhou Aoheng Company has professionally developed more than ten kinds of self-leveling cements with different uses according to market demand. It can be divided into low-end self-leveling cement and high-end self-leveling cement by category. According to the compressive strength, it can be divided into ordinary self-leveling cement, medium-strength self-leveling cement, and high-strength self-leveling cement. According to the major categories of use, it can be divided into industrial self-leveling cement and commercial self-leveling cement. According to the function of use, it can be divided into decorative self-leveling cement and functional self-leveling cement. Therefore, before adopting Aoheng self-leveling cement floor materials, you should first consult Aoheng company according to your specific needs and uses to determine the type of self-leveling cement used. According to the product type, price comparison, otherwise, there will be high-end use of low-priced products or low-end use of high-priced products, the results can be imagined.
For example: according to the compressive strength classification, the corresponding models of Aoheng self-leveling cement are:
1. Ordinary self-leveling cement: AP-330 commercial self-leveling cement, the compressive strength is: 20--25mpa
2. Medium-strength self-leveling cement: AP-330F reinforced self-leveling cement, compressive strength: 30-35mpa
3. High-strength self-leveling cement: other models of Aoheng Company, such as: AP-340 surface high-strength self-leveling cement, AP-350 color cement self-leveling, AP-320 multi-functional high-strength cement self-leveling. The compressive strength is about 45mpa.
Selection examples:
1. If the parking lot, factory, and warehouse use self-leveling cement, choose high-strength self-leveling cement with high load bearing and high wear resistance. The compressive strength is 45mpa, and the construction thickness is more than 5mm. Otherwise, the hidden dangers of product quality after construction are already there.
2. If it is a simple ground leveling, to provide a flat base surface for thick floor materials such as wooden floors, carpets, PVC plastic floors, etc., choose 20-25mpa ordinary self-leveling cement.
This article is from Guangzhou Aoheng Building Decoration Materials Co., Ltd. Please indicate the source when reprinting!
Related articles:
1. What role does the interface agent play in the construction of self-leveling cement?
2. What is self-leveling cement?
聯系方式 
微信聯系